Lessons Learned About

How To Ensure Physical Termite Control When Fixing Hardwood Floors

Termites are known for their goodness in the ecosystem but also for the destruction they can cause on property. Most victims of termite destruction are hardwood floors. When a hardwood floor is fixed properly, during fresh construction or when refinishing, it is highly unlikely that you will need termite control services later on. This article will help you prevent risks of damage to your hardwood floors by termites.

It is crucial that you look at the spaces between the floor planks before starting the reconstruction. The essence of this step is to spot any pests, and especially termites under the floor. Termite control will be necessary if you observe any signs of termites. The other benefit of carrying out observations is that you will be aware of the type of floor you are dealing with. While some floors like oak and pine are easier to work with, others, like mahogany and maple are more complex. You should then begin the refinishing process after you are certain that you can refinish your hardwood floor.

The next important termite control procedure in refinishing hardwood floors is conducting an adhesion test. You should set apart a small area of the floor for conducting the adhesion test. You should begin by cleaning the area of floor that you are dealing with using a floor cleaner. After cleansing the termite control area, sand it with a sanding screen and wipe off the extra residue. Then follows the application of polyurethane coat on the dust-free surface. You can then check on the area after about twenty-four hours. Apart from the dust, the area will be smooth. You can then press down on the surface using medium and even pressure to confirm that the solution will adhere properly.

You should then collect all the necessary flooring equipment that you will use. Such materials include termite control edge sander, hammer, pliers, nail set, box fan, painter’s tape, work gloves, safety glasses, hearing protection, breathing protection, industrial grade vacuum cleaner, polyurethane floor sealant, power floor buffer and wide-blade dull putty knife. Ask your neighbor if you can termite control the above items from them and if they do not have them, buy from an online seller or from a home improvement store near you.

The steps that follow then include cleaning your floor, buffer it and then add the floor finish. Cleaning helps the floor to come out flawless. Bear in mind while buffing that the sanding screen only lasts at most fifteen minutes before it loses its sanding ability. Make sure that you thoroughly clean the floors of any dust before you add the finish. The floor finish that you will find easy to use is polyurethane.